Wednesday 6 October 2010

Why not choose a Heritage Composite door?

Our Heritage Composite door Collection offers the look and feel of a timber door without the inherent problems. No more painting, sanding or varnishing. No more cracking, bowing or twisting. Just an occasional wipe over with a damp cloth will restore it to its original finish.

Each door is manufactured with state of the art technology that meets all British standard tests. An exciting range of glass designs are available and the rich grained surface even has those unique, tiny characteristics left by the hand of a craftsman to give it that traditional timber feel.

Seven colour options are available including White/White, Blue/White, Red/White, Black/White, Green/White, Rosewood/White and Light Oak/White, the coloured option always facing outward.

All of our Heritage Collection doors come fitted with:
 » 2 hook and 3 deadbolt white wrap around lock PAS 23/24 Certification and Police preferred security specification.
» 45mm back set
» White powder coated Aluminium wrap around faceplate to two sides
» Adjustable top, bottom and centre keep system Lever-lever or lever-pad function (optional)
»3x 3 way adjustable hinge meets requirement of BS EN 1670:1998.
Door Leaf
Fibreglass (GRP Thermoset) through colour door facings nominal 2mm thickness with grained effect surface • No finishing required • Low maintenance: wipe down with soft cloth and warm water to clean • 44mm Thickness • Supplied fully finished with hardware and glazing pre-fitted (except handles supplied only) • High Density closed cell rigid polyurethane foam that is ODP ZERO.
Glazing
Through colour click fit glazing system with grained effect. Pre-finished to match door • Pre-glazed with 26mm thickness double-glazed • Glazed units incorporate toughened or laminate glass to BS6206 (Low E glass may be supplied but not required for compliance with Part L1 of the building regulations for England & Wales).
PVC Outer Frame
Offered in 70mm thickness • 70mm profile fitted with 1 bubble gasket and two brush seals (triple seal) • Supplied as welded goal post frame with 150 cill attached as standard other options available • Steel reinforced PVCu outer-frame • PVCu Highly UV stabilised BS1006 1978 • High impact resistant • Profile tested to BS476 Part 7 1971 have achieved a class 2 minimum surface spread of flame rating • Low coefficient of thermal conductivity has insulation properties of 0.035 W/M c three times better insulation than a timber alternative • High Impact resistance.
Lock and Hinge
White wrap around lock PAS 23/24 Certification and Police preferred security specification • 45mm back set • White powder coated aluminium wrap around faceplate to two edges • Adjustable top, bottom and centre keep system • Lever-lever or lever-pad function (optional) • 3D Challenger butt hinge x 3 allows for lateral +2mm –2mm, height +3mm and compression –0.75mm +0.75mm adjustment while the door is closed • Meets requirement of BS EN 1670:1998 • High security pin and locking screw • Other lock specifications available on request.
Threshold / Weather Bar
Low 14.5mm threshold PAS 23/24 certified • Part M compliant options available • 150 cill fitted as standard.


1 comment: